| Part Number |
Part |
Description |
| RA2-2484 |
Arm |
Bin full sensor arm - Attached to Face Up bin sensor flag |
| RB1-6417 |
Registration paper sensor arm - Senses paper in registration assembly |
| RB1-6557 |
Paper input unit sensor arm - Senses when paper passes through paper input unit |
| C4785-60516 |
Attachment Kit |
Attachment kit - Attachment rod, bracket and cables |
| C3764-60505 |
Bin |
Face-up paper output bin |
| RS5-1399 |
Bushing |
Drive bushing - Paper deck drive assembly bushing |
| C4787-60507 |
Cable |
Stapler unit C-link cable - Has two high density 15-pin (M) connectors - 91.4cm (36in) long - From multibin mailbox to stapler unit |
| RG5-1843 |
Paper sensor cable - J11 to J15 |
| RG5-1850 |
Duplexer cable assembly - From duplexer to DC controller |
| RG5-1859 |
Sensor cable - PIU PS2 sensor cable - J13 to J1205 |
| RG5-1861 |
Cable assembly - 20-pin (F) connector on each end - 39.4cm (15.5in) long - Sensor cable - PIU paper sensor cable - J1201 to J219 |
| RG5-1920 |
Cassette size sensor cable - Between cassette size sensor PCA's and formatter board |
| RG5-1928 |
Registration cable assembly - Includes 7P and 3P connectors |
| RG5-3919 |
Main cable - Largest cable in C4781A |
| RG5-4377 |
Cable assembly - An 11-pin (F) connector, a 10-pin (F) connector, and two 7-pin (F) connectors - 1.1m (3.7ft) long - Laser and control panel cable |
| RG5-4378 |
Cable assembly with ferrites - Has many connectors: a 14-pin (F), an 11-pin (F), two 7-pin (F), a 5-pin (F), two 4-pin (F), and two 3-pin (F) - 85.6cm (33.7in) long - Scanner motor cable |
| RG5-4381 |
Cable assembly - 18-pin (F) connector to 25.4cm (10in) grounding wire with ring terminal, 35.7cm (14in) cable with 4-pin (F) connector, 53.3cm (21in) cable with 1-pin (F) connector, and 86.4cm (34in) cable with 4-pin (F) connector - Fuser cable 1 |
| 5063-1254 |
Cable (Interface) |
IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles |
| C4781-60504 |
Multi-Bin mailbox interface C-link cable - 45cm (17.7-in) long - From printer to Multi-Bin Mailbox or to Tray 4 and 5 |
| C4182X |
Cartridge |
Black Ultra-Precise toner cartridge |
| 5090-3379 |
Cleaning Supplies |
Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| C4785-60512 |
Clip |
Multibin mailbox attachment clip - Attachment clip - Attaches multibin mailbox to printer |
| RB2-3636 |
Tray lock clip - At rear of top output tray - Tray lock clip - Plastic clip at rear of top output tray |
| RG5-4308 |
Clutch |
Registration assembly clutch - Attached to right side of registration assembly |
| RH7-5204 |
feed clutch - On right side of paper input unit |
| RG5-5268 |
Control Panel |
Control panel - Includes display |
| 5851-2583 |
Cover |
EIO slot cover - Installs on formatter boards without JetDirect PCA |
| C3764-60555 |
Top cover - For Multi-Bin Mailbox |
| RB1-6480 |
Lower Left Cover - Mounted below diverter door assembly |
| RB1-6489 |
AC access cover - Has cut out for A/C power cord connection |
| RB1-6492 |
Power switch cover - Has cutout for power switch |
| RB1-7832 |
2000 sheet paper tray right side cover |
| RB2-2509 |
Clutch cover for 2000 sheet input tray |
| RB2-3642 |
Right rear cover - Attaches to the sheet metal rear cover |
| RF5-2568 |
Front cover - Contains LED status display window |
| RF5-2646 |
Left cover - Left side cabinet cover |
| RG1-3838 |
Top cover assembly - Upper guide |
| RG5-4360 |
Top cover assembly - Does NOT include face up tray or control panel display |
| RG5-4362 |
Front cover - Front access door mounts to this cover |
| RG5-1874 |
Delivery |
Face down delivery assembly - Feeds paper to top of printer |
| RG1-3844 |
Diverter |
Diverter assembly - Flipper |
| RG5-4325 |
Diverter assembly - Diverts paper to duplexer assembly or face up tray or face down delivery assembly |
| RB2-3558 |
Door |
Diverter door assembly - Upper door on left side of printer - Two struts are mounted to door |
| RB2-3626 |
Front access door - Duplexer jam removal access door |
| RG5-1915 |
Right door assembly - Door below paper tray 1 - Support strap attached to right side |
| C2985B |
Drive (Product) |
2.1GB hard drive - LaserJet EIO font/print job storage |
| RF9-1249 |
Drive Assembly |
Diverter drive assembly - Four gear drive assembly - 20-tooth gear NOT included |
| RG5-3851 |
Paper deck drive assembly - Gear assembly that lifts the paper plate to the pickup roller |
| RG5-4365 |
Main drive gear assembly - Driven by main motor - Mounted on rear of chassis |
| RG5-4416 |
Paper deck drive assembly - Gear assembly that lifts the paper plate to the pickup roller |
| C4782A |
Duplexer |
Duplexer assembly - For 2 sided printing capability |
| C3765B |
Envelope Feeder |
Optional envelope feeder - Automatically feeds 100 envelopes |
| RH7-1266 |
Fan |
Tubeaxial fan - (FM2) - For the low voltage power supply |
| RH7-1271 |
Tubeaxial fan - (FM3) - For the formatter board cooling - Mounts on the rear of the chassis |
| RH7-1289 |
Tubeaxial fan - (FM4) - Mounts on the rear of the face down delivery assembly |
| RH7-1396 |
Tubeaxial fan (low profile) - (FM1) - for the laser/scanner assembly power supply |
| RH7-1397 |
Tubeaxial fan - (FM5) - Mounts in the tray 1 pickup assembly |
| RG5-4305 |
Feed Assembly |
Feeder assembly - Transfer roller and registration assembly are mounted on this assembly - Mounted on upper right side of chassis |
| C4214-60009 |
Firmware |
Firmware ROM, 8100 vers MB5.62 |
| C8530-679xx |
|
Firmware ROM, 8150 |
| Q5693-67922 |
Flipper |
Flipper assembly (with cable) - Moves paper from printer to face down mailbox tray or the face up bin on top - Includes firmware chip |
| RB1-6421 |
Foot |
Chassis foot - Support for right side of printer chassis - Two used |
| RG5-4203 |
Outrigger adjustable foot - Adjusts up and down |
| RG5-4205 |
Cabinet stabilizer (outrigger) - With adjustable foot |
| RG5-4206 |
Adjustable foot - Threaded attachment for leveling |
| RG5-6532 |
Fusing Assembly |
Fusing assembly (For 100V to 120V operation) - Bonds toner to paper with heat |
| RB1-6776 |
Guide |
Tray rail guide (Spring loaded metal guide) - Support for tray 2 and 3 - Mounts on the right side of the internal chassis |
| RB2-3622 |
Toner cartridge guide - Plastic piece with slot to guide toner cartridge |
| RF5-1394 |
Transfer guide |
| RF5-1484 |
Paper size guide/stop - For upper or lower paper input tray |
| C4785-60523 |
Head Assembly |
Head assembly - Moves paper up and down the mailbox to the correct mailbox bin |
| RH7-4126 |
Heater |
Heater element for fusing assembly - 120V |
| J3110A |
Interface (Product) |
Ethernet 10Base-T (RJ-45) EIO network internal print server PC board - Ethernet 10Base-T (RJ-45) EIO Network PCA |
| J3111A |
Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA - Ethernet 10Base-T/10Base2 & LocalTalk (RJ-45, BNC, LocalTalk) EIO Network PCA |
| J3112A |
JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J3113A |
JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot |
| J4135A |
JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
| J4167A |
JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J4169A |
JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J7934G |
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| RG5-4344 |
Laser/Scanner |
Laser/scanner assembly |
| XZ9-0379 |
Latch |
Door latch insert (Black) - Door latch (Black) - For front access door |
| RB1-6692 |
Lever |
Paper sensing lever - Senses paper in face down delivery assembly |
| RB1-6693 |
Paper height lever - Senses when face-down tray is full |
| RB1-6615 |
Lock |
Right fusing assembly lock - Locks fuser in place |
| RB1-6616 |
Left fusing assembly lock - Locks fuser in place |
| C4787A |
Mailbox |
5-bin mail box with stapler - Holds 2100 sheets of paper used with 5Si family, Mopier and 8000 printers |
| C3914A |
Maintenance Kit |
Maintenance kit (120V) - Replacement parts after 350K pages includes, fusing assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed |
| Q7708-67951 |
Memory (DIMM) |
64MB, 100-pin SDRAM DIMM memory module |
| C4135A |
Memory (Product) |
4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4136A |
8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4137A |
16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4286A |
2MB flash DIMM memory - Font storage device |
| C7843A |
16MB, 100-pin SDRAM DIMM memory module |
| C7845A |
32MB, 100-pin SDRAM DIMM memory module |
| Q1887A |
64MB, 100-pin SDRAM DIMM memory module |
| C4781-60500 |
Module |
AC power box - Holds AC recptacle, fuse holder, and four cable connections - Includes mounting clips |
| C4785-60518 |
Motor |
Transport belt motor - Includes fan |
| Q5693-60531 |
Elevator stepper motor - Moves the delivery head assembly into position - |
| RH7-1350 |
Paper input motor - Drives rollers to pickup and feed paper from lower paper trays |
| RH7-5219 |
Main motor - Mounted on rear of chassis |
| C4107-67901 |
PC Board |
Formatter board, 8100 |
| C4265-67901 |
Formatter board, 8150 |
| RG5-4375 |
DC controller board assembly |
| C4785-60543 |
Mailbox contoller PCA - |
| RG1-3853 |
Controller board - 7-bin tabletop mailbox controller PCA |
| RG5-1845 |
Paper size sensor board - Used to sense paper size in upper and lower paper trays - |
| RG5-1846 |
Switch/sensor board - Includes face down tray sensors, fusing delivery sensor and door switch - Switch/Sensor Board - Includes Face Down Tray Sensors and, Fusing Delivery Sensor |
| RG5-1860 |
Pickup board - Includes 8 photosensors - pickup Board - Includes 8 Photosensors - Mounted to Side of pickup Assembly |
| RG5-1884 |
Multipurpose paper tray board - Includes paper sensors PS1301 and PS1302 - Multipurpose Paper Tray Board - Mounted to Right Side of Pickup Assembly - Includes paper sensors PS1301 and PS1302 |
| RG5-2166 |
Sensor PCA - Paper quantity sensor PCA |
| RG5-2168 |
Sensor PCA - Paper size sensor PCA |
| RG5-3908 |
Paper deck PCA - Input tray controller PCA |
| RG5-4442 |
Controller PCA - 2 x 500-SHEET input tray controller PCA |
| J4135-61001 |
PC Board (Interface) |
JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO Slots on selected DesignJet and LaserJet printers (Part of J4135A) |
| RF5-2703 |
Pad |
Separation pad - Tray 1 separation pad |
| RG5-4330 |
Pickup Assembly |
Pickup assembly - For multipurpose/tray one paper input |
| RF5-2556 |
Pin |
Positioning pin - Metal locating pins - Set of three - Maintains proper alignment of printer and optional feeder |
| RB1-6582 |
Plate |
Upper paper guide plate |
| RG5-3849 |
Middle paper limit plate - Middle Paper Limit Plate - |
| RG5-3850 |
Front paper reference plate - Front paper limit plate for 2,000-sheet feeder |
| RG5-4201 |
Rear paper limit plate - Back paper limit plate for 2000 sheet feeder |
| RG5-4357 |
Power Supply |
Low voltage power supply (120v,60Hz) - Includes power switch, AC receptacle and DC power supply |
| RG5-4021 |
Universal power supply |
| RG5-4306 |
High voltage power supply assembly |
| RB1-6777 |
Rail |
Right side tray rail - Channel that attaches to metal frame for tray two and three support |
| RB1-6778 |
Rod |
Rod - Tray connector rod for springs |
| RB1-9526 |
Roller |
Pickup roller - Used in tray 1 pickup assembly |
| RB2-3851 |
Pickup roller - Black and gray D-shaped roller |
| RF5-1834 |
Feed/separation roller - Has a blue gear on one end and blue release tab on the other - Mounts in the paper input unit assembly (four used) |
| RF5-1835 |
Pickup roller assembly - Has attached Black plastic gear - Mounts in the 2000 sheet paper tray |
| RF5-2708 |
Pickup roller - Used in pickup assembly - 2 used |
| RG9-1361 |
Transfer roller assembly - Includes transfer roller with attached gear only |
| RG5-4303 |
Roller Assembly |
Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it |
| H3977-60001 |
Roller Kit |
Paper path roller kit - Contains four feed/separation rollers and 2 pickup rollers used in Paper Input Assembly - Also has MP/Tray1 pickup roller - Procedure requires service manual |
| RH7-7105 |
Sensor |
Surface temperature sensor - Fuser temperature sensor on opposite side of gear assembly of fusing assembly |
| RY7-5080 |
Photo sensor kit - Includes photo sensors PS 1,3,5 and 6 - Photo sensor - For paper registration or pickup sensor - Two used |
| RB1-6749 |
Shield |
Internal cover for Tray 1 pickup assembly |
| RG5-1875 |
Solenoid |
Face Up solenoid assembly - Face Up solenoid assembly - Mounted to rear of chassis |
| RB1-6558 |
Spring |
Sensor arm torsion spring - Holds tension on PIU paper sensor arm |
| RB1-7835 |
Leaf spring - Retaining spring |
| RS5-2499 |
Tension spring - Front spring on metal slide |
| RS6-2073 |
Compression spring - Holds tension on rear support block |
| RB1-6427 |
Stop |
Cartridge Stop |
| RB1-6783 |
Tray stop |
| RB1-6484 |
Strap |
Support strap - Supports door when open - For lower right side door |
| RB2-3504 |
Support |
Shaft holding block - Rear registration roller support |
| RF5-2701 |
Access door struts - Attached to each side of diverter door assembly - Access door struts - Attached to each side of diverter door assembly - Two used |
| RH7-7106 |
Switch |
Thermal switch - Fuser assembly thermal switch located on opposite side of gear assembly of fusing assembly |
| RB1-7677 |
Tab |
Retainer tab |
| C4785-60524 |
Tape |
Metallic tape and housing assembly - Guides and holds the paper against the transport belt (Wide tape version used with the single belt transport belt system) |
| RB2-3581 |
Torque Limiter |
Torque limiter - Limits rotation of feed rollers |
| C4780A |
Tray |
HP LaserJet 8000 and 8100 Series Optional 1000 (2 x 500) sheet paper trays (Trays 4 & 5) - Holds up to 1000 sheets of letter, legal, tabloid/ledger, A3, A4, B, or B4 size paper - Optional 1000 (2 X 500) Sheet Paper Trays (Trays 4 & 5) - Installs Under Pr |
| C4781A |
HP LaserJet 8000, 8100, and 5Si Series Optional 2000 sheet paper tray (Tray 4) - Holds up to 2000 sheets of letter, legal, tabloid/ledger, A3, A4, B, or B4 size paper - Does NOT include paper handling controller board - Optional 2000 sheet paper tray (Tra |
| C4785A |
8 bin mail box - Holds 2600 sheets of paper - Used with 2000 sheet paper tray or printer cabinet |
| R98-1004 |
Lower paper input tray (Tray 3) - 500 sheet capacity - For letter, legal, 11inch x 17inch (B-size), A4 (210MM x 297MM), A3 (297MM x 420MM) and B4 (257MM x 364MM) size paper - Lower paper input tray (Tray 3) - 500 Sheet - For Letter, Legal, 11inch x 17inch |
| R98-1005 |
Upper input paper tray (Tray 2) - 500 sheet capacity - For letter, legal, and A4 (210MM x 297MM) size paper - Tray 2 - Holds 500 sheets - Letter, Legal, A4, JISB4 - Also one of two used in Tray 4 with C4780A (2 X 500) configuation |
| R98-1006 |
Tray 5 assembly - Complete tray with identification label |
| R98-1007 |
Tray 4 assembly - Complete tray with identification label |
| RB1-6491 |
Face-up output tray - At upper left side - Face-Up output tray - Mounted on upper left side |
| RG5-4329 |
Multi-Purpose paper input tray (Tray 1) - Multipurpose Paper Input Tray (Tray 1) - Includes pull out extender tray |
